Kategori : Preamplifier
Diproduksi kisaran tahun 1977 (Sony membuat 2 Model yakni TA-E88 untuk pasar Domestic Japan (100V) dan TA-E88B untuk pasar EROPA (220V)
Dengan design yg cukup berkelas dan unik dimana masing-masing colokan RCA untuk input dan outpurnya mengadap vertical dengan warna mencolok (merah dan putih ) dan menggunakan gold plate yg sangat baik dan tebal
Saat dibuka komponen yang dipakai terlihat begitu BERKELAS dengan menggunakan 2 pcs travo daya (100V)
Preamplifier ini tanpa menggunakan control bass/treble (Flat)
Saat diproduksi tahun 1977 preamplifier ini berharga cukup mahal ( 200.000,-yen)..andai dihitung kurs sekarang seharga Rp. 20.000.000,-Tapi memang wajar dilihat dari komponen2 yg dipakai, seperti terlihat digunakannya potensiometer ALPS yg cukup besar dan mungkin skrg potensio seperti ini sdh tdk ada lagi,dan andaikan ada akan berharga cukup MAHAL.
Harga : SOLD/TERJUAL By Mr. Brm
08123214422
spec :
| Input sensitivity : | 2,5mV (phono 1 & 2) |
| 0,125mV (phono 1 & 2 + head amp) | |
| 150mV (lines) | |
| Input impedance : | 50kOhm (phono 1) |
| 10kOhm...100kOhm (in 10kOhm steps, phono 2) | |
| 25 Ohm or 100 Ohm (phono 1&2 + head amp) | |
| 50kOhm (lines) | |
| Input capacitance : | 100pF (phono 1) |
| 100pF...500pF (in 100pF steps, phono 2) | |
| Maximum input : | 250mV (phono 1&2, 1Khz) |
| 12,5mV (phono 1&2 head amp, 1Khz) | |
| Outputs : | 2x Tape (150mV / 1kOhm, 15V max.) |
| 2x pre out (1,5V / 100 Ohm, 15V max.) | |
| THD : | 0,002% or less at 10V output |
| IMD : | 0,002% or less at 10V output |
| Frequency response : | DC...500Khz (+0 / -1dB) |
| 20Hz...20Khz (±0,2dB ; RIAA) | |
| Residual noise : | 6µV (IHF-A) |
| S/N ratio : | 88dB (2,5mV input ; phono 1 & 2) |
| 100dB (10mV input ; phono 1 & 2) | |
| 80dB (0,2mV input ; phono 1 & 2 + head amp) | |
| 105dB (150mV input ; lines) | |
| Phono gain : | 27dB |
| Subsonic filter : | 15Hz @ 12dB/oct. |
| Componentry : | 30 FETs |
| 174 transistors | |
| 29 diodes | |
| PC : | 22W |
| Dimensions : | 48 x 8 x 37cm |
| Weight : | 9,4kg. |
| FEATURES | |
| > Direct-coupled reference-standard preamplifier, with straight-path signal | |
| > Separate monophonic preamplifier for each channel including separate voltage-regulated power supplies | |
| > Built-in head amplifier | |
| > Head amp includes exclusive Sony LEC transistors and its own power supply | |
| > Selectable phono input capacitance and impedance | |
| > Sony-developped, cascode-connected dual-FETs and bipolar transistors in EQ amp and buffer amp stages for low distortion and high thermal stability | |
| > Buffer amp isolates tape-output connections from preamp circuitry for low-distortion signal flow | |
| > Select-grade components used throughout, including silver and gold-plated control contacts, plus metalized-film resistors and polypropylene-film capacitors |
